Dreamland N3901 사용 설명서 지침 - 페이지 8
{카테고리_이름} Dreamland N3901에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreamland N3901 12 페이지. Intelliheat easy fit heated underblanket
Dreamland N3901에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
For night-time or continuous use, set the control unit to
EN
temperature levels 1 to 5 only.
temperature than recommended for continuous use. If the
appliance is slept on with the controls set to a higher
temperature the user may suffer skin burns or heat stroke.
WARNING!
pillow or under the sheets when in use.
1 OR 9 HOURS AUTO SHUT OFF TIMER: FOR ALL NIGHT USE ONLY
- The Intelliheat control has an AUTOMATIC SHUT OFF TIMER. To set the
timer, press the timer button (7) Diagram [C] and select either 1h or 9h. This
will be illuminated in green on the (3) LED Display (6) Diagram [C].
TIMER OFF/STANDBY: When the set time period has elapsed, the blanket
will automatically switch off and the standby light will be illuminated in blue on
the (3) LED display (10) Diagram [C]. If you wish to switch your blanket back
on again, press the timer button (7) Diagram [C] selecting either 1 or 9 hours.
MANUAL SWITCH OFF BOTH BLANKET AND CONTROL: Switch off the
back of your Intelliheat control (11) Diagram [C] to off 'O' position.
MEMORY FUNCTION: After using your blanket for more than 5 minutes, the
Intelliheat control will remember your last temperature setting.
DISCONNECT: To disconnect your mattress protector from the mains socket,
switch the control to OFF position on the back of your Intelliheat control 'O' (11)
(Diagram [C]), and then safely disconnect the plug from the mains socket.
Your mattress protector is suitable for washing. Check the washing instructions on the
label of your underblanket to wash it correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the blanket
before cleaning or performing maintenance.
BEFORE WASHING OR STORING YOUR MATTRESS PROTECTOR:
1. Disconnect the control from the mains socket.
2. Disconnect the connector (2) from the mattress protector by pressing the push
6
DO NOT get into bed with the control unit set to a higher
DO NOT place the control unit under the