Carmen C81044 안전 및 사용 설명서 - 페이지 8
{카테고리_이름} Carmen C81044에 대한 안전 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmen C81044 15 페이지. Ionic straightening brush
페이지 인쇄
USING YOUR APPLIANCE
Control Settings
1
2
1.
LED Temperature Display
2.
Increases Temperature Button
3.
Power Button
4.
Decreases Temperature Button
Indicator Light
Red –
The light will turn red to indicate that
the Ionic Straightening Brush is powered on.
The light will ONLY go off when the appliance is
turned off.
Note:
The Indicator Light does not change
colour.
Temperature Settings
The Ionic Straightening Brush comes with 11
preset temperatures that range from 180°C to
230°C. You can select the temperature in 5°
increments.
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6060
8
3
4
Turn On Brush/Select Temperature
1.
Safely plug the brush into an electrical
outlet.
2.
Press and hold the power button (located
on the handle) for 3 – 5 seconds to turn it
on. The temperature display will light up.
The indicator light will turn red to show that
the appliance is powered on.
3.
Based on your hair type, press the plus or
minus buttons on the handle to select the
desired temperature. The display will show
a preset temperature, until you make your
selection.
Note:
The thicker and coarser your hair, the
higher the temperature you should use.
4.
Once selected, the display will show your
chosen temperature. The brush will take
approximately 1 to 2 minutes to reach the
selected setting.
Note:
The temperature will remain even while in
use.