ATI Technologies BL30081 사용 설명서 - 페이지 6

{카테고리_이름} ATI Technologies BL30081에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies BL30081 8 페이지. Marine water heater with dual heating as standard: electrical heating and indirect heating

페이지 인쇄

INSTRUCTIONS FOR THE USER

11.MAIN PARTS (FIG_11-1)

POS.

12. INTERVENTION WATER SAFETY

The electrical heater is equipped with a thermostat which also has safety function: it interrupts the power supply to the electric

heater in case of excessive water temperature. If this occurs, to start again the appliance, it is necessary a manual

intervention (manual reset).

DANGER: THE OPERATION OF THE THERMAL CUT-OUT INDICATES A POSSIBLY DANGEROUS

SITUATION. DO NOT RESET THE THERMAL CUT-OUT UNTIL THE WATER HEATER HAS BEEN

SERVICED BY A QUALIFIED PERSON

For the manual reset operation proceed as follows:

a) disconnect the power supply

b) remove the electrical resistance of the protective cover (FIG_12-1)

c) press reset button positioned on the thermostat (R - FIG_9-1)

d) mount of electrical resistance protective cover (FIG_12-1)

e) restore power supply

13. SAFETY VALVE INTERVENTION

The device is equipped with overpressure safety valve: it protects the tank from possible excessive pressure caused by the

expansion of water during heating. Upon the occurrence of this situation, the water is discharged through the outlet of which

is equipped with the valve.

A small amount of water may escape from this exhaust during the step of heating water.

CONTINUE A LOSS OF WATER FROM THE VALVE MAY INDICATE A PROBLEM WITH HEATING.

FAILURE TO OPERATE THE RELIEF VALVE EASING GEAR AT LEAST ONCE EVERY SIX MONTHS

MAY RESULT IN THE WATER HEATER EXPLODING. CONTINUOUS LEAKAGE OF WATER FROM THE

VALVE MAY INDICATE A PROBLEM WITH THE WATER HEATER

14. MAINTENANCE OF THE APPLIANCE

To make ensure safe operation and extend its life, it is recommended regular inspection (at least annually) by the authorized

customer service or by suitably qualified personnel

Recommended operations during the periodic inspection:



sealing the plumbing fittings



Failure to fully loosen the safety valve



fastening occurs (replace the fastening screws in case they are worn)



electrical system efficiency and electrical grounding



conditions of the power cable (if it is damaged it must be replaced by the manufacturer, authorized technical service

or by qualified personnel in order to avoid risks)



the pressure-relief device is to be operated regularly to remove lime deposits and to verify that it is not blocked



yearly replacement of the anode (FIG_14-1)

To avoid damage caused by frost during the cold season, in the case the boiler is not used, it is necessary to completely

empty the apparatus.

15. WARRANTY

The warranty terms are valid provided that the installation instructions contained in this booklet are followed. The warranty

begins since date of manufacture printed on data label and it has a duration of 36 months. For safety reasons and for the

validity of the guarantee it is mandatory to use only original spare parts.

COD.

DESCRIPTION

0-0410

fixing-mounting bracket

020-0060

heating element cap

100-0086

gasket

130-0134

MF 1/2" x 30 extension fitting

130-0092

pressure relief valve

140-0001

cable gland

280-0014

heating element 550 w – 230 V

280-0015

heating element 850 w – 230 V

280-0016

heating element 1250 w – 230 V

280-0042

thermostat

900-0135

power cable

ENGLISH

BL..05

BL..08

BL..12

p. 4/4