DreamLED SPL-1000 사용자 설명서 - 페이지 3

{카테고리_이름} DreamLED SPL-1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DreamLED SPL-1000 20 페이지. Solar path led light

INTRODUCTION

Dear customer,

You have chosen to purchase a DREAMLED Solar Path Light SPL-1000. We thank

you for this purchase and hope that your experiences with this quality product will

be pleasant ones. Prior to using this product, you should carefully read these user

instructions so that you can then install and operate your SPL-1000 accordingly. Please

keep these user instructions so that you can reference them later on.

PARTS & ACCESSORIES

1. Bracket

2. Light panel

3. Solar panel (+integrated light sensor)

4. Motion sensors

5. Mode buttons

The SPL-1000 is a Solar outdoor light with motion sensor. The solar panel acts as

the major energy source: it converts sunlight into electricity and recharges the internal

battery. Please note that when installing the lamp, the solar cells require as much

DIRECT SUNLIGHT as possible (at least 10 hours). The longer the solar cells are

exposed to direct sunlight, the longer the lamp will stay ON during the night.

When the lamp is in a location that receives less sunlight, it will operate for fewer hours

per night, depending on the selected lighting mode. Night lighting time can also vary

depending on how bright the sky is on any given day.

Insufficient charging of the battery will affect performance and may result in the fact that

the lamp goes off before dawn because the battery was not fully charged.

The solar panel is best directed as much as possible towards the south in order to

maximize exposure to direct sunlight. Please note that the four different seasons (and

the sun's angle in these 4 periods) can affect the lighting time of the lamp.

Select a location that is not located close to other light sources, such as for example

street lighting, because this enables the lamp to be switched off automatically.

Maximum lighting time depends on sunlight and daytime charging. Min. charging time

is 10 hours in direct sunlight.

-3-

6. Pole mounting part

7. Expansion screws

8. Normal screws

9. Torx & Screwdriver