AIRTAC DPSP1-10 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} AIRTAC DPSP1-10에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRTAC DPSP1-10 2 페이지. Digital display pressure switch

페이지 인쇄

(Advanced mode)

Interface of advanced mode

Press the value up and down

Advanced mode

button setting the value

Display

Neither

Display

setting value

pressure unit

100ms

250ms

500ms

1000ms

Power-saving mode

Backlight off

Backlight on

Change backlight

color when

color when output1

color either output1

color when

output1 works

output2 works

and output2 work

or output2 works

Copy function:OFF

Copy function:ON

Slave device

Master device

Factory-fresh state

Factory-fresh

state:OFF

state:ON

Press the SET button to change menu

F -

DPS

Panel mount adapter + Front protective cover

Assembly type

EB:Panel mount

LB:Bracket

Assembly code

Step1-Front cover assembly

Copy /Key lock /Zero-clear Function

Copy Function

1.Hardware:Connect the second pin of master device with the third pin of slave

device,then power on after connecting.

2.Software:Set "CP-M" on master device. Set "CP-S" on slave device.

3.Icon of copy completed ：

Repeat step 1 and 2 if copy failed.

4.Turn off the power,disconnected devices and restart it after setting.

Bottom row

value

Power supply: DC24(+) (Brown)

display

Power supply: DC24(-) (Blue)

Display

period

setting

Hysteresis

setting

Master device

Color choice in

basic mode

Backlight

Zero-Clear Funtion

setting

Press

and

simultaneously

to reset the display value to

zero.

Copy function

Press

and

Press

simultaneously.

button simultaneously.

Dimensions/Assembly Instructions

-0.5

Panel frame dimension

Unit:mm

Step2-Back cover assembly

Slave device

Output1(Black)

Output2(White)

Key lock Funtion

Lock:Press

and the SET button simultaneously.

Release it when the display turns to "LoCK on".

Unlock:Press

and the SET button simultaneously.

Release it when the display turns to "LoCK oFF".

Press any button will display "LCK" in lock on mode.

Press

and the SET

button simultaneously.

Bracket

∅

29.6

t=1.6

Bracket dimension

Unit:mm

∅

5.2

Output Mode Description

Basic mode: Set the pressure value P. When the applied pressure value is

greater than P + hysteresis value, the display will ON. When the applied

pressure value is less than P + hysteresis value, the display will OFF.

Mode setting-

Pressure setting-

Pressure

Set point value P

Output:ON

Output:OFF

Hysteresis mode:Set the pressure value H/L. When the applied pressure value is

greater than H, the display will ON. When the applied pressure is less than L,

the display will OFF.

Mode setting-

Pressure setting-

Pressure

Set point value H

Set point value L

Output:ON

Output:OFF

Window comparator mode:Set the pressure value H/L.When the applied pressure

value is greater than H + hysteresis value or less than L, the display will OFF.

When the applied pressure value is less than L + hysteresis value, the display

will ON.

Mode setting-

Pressure setting-

Pressure

Set point value H

Set point value L

Output:ON

Output:OFF

-High pressure(1000kPa) Unit:1kPa

Hysteresis value

-Low pressure(100kPa) Unit:0.1kPa

Hysteresis value-

Time

Hysteresis value-

Time