Andersen 46STE Compact 매뉴얼 - 페이지 11

{카테고리_이름} Andersen 46STE Compact에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 46STE Compact 17 페이지.

6. Remove gear wheel (19) by removing screw (17) and then sliding shaft (18)

upwards.

7. Remove the complete freewheeling ratchet gear

(10-16) by sliding the shaft (9) upwards and

pulling the complete freewheeling ratchet gear

out to the side. (Figure 4)

8. Remove the second freewheeling ratchet gear

(29-35) as in step 7 by removing shaft (28).

9. For base covers (27) in stainless steel remove

10. The base cover (27) by removing the screws holding the base covers to the lower

base (26). For base covers (27) in PETP plastic carefully tap the base cover (27)

from the lower base (26) with a rubber hammer.

11. Reassemble the winch with the new lower base by reversing the procedure above

from 9-3 remembering to apply grease to moving parts.

12. Your winch is ready to be mounted on your new above deck compact motor.

Page 11 of 17

Figure 4

Figure 5