Andersen RA2050001300 제품 설명서 - 페이지 13
{카테고리_이름} Andersen RA2050001300에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen RA2050001300 18 페이지. To suit self-tailing winch sizes 46,50
페이지 인쇄
SERVICE & MAINTENANCE
*Note: Always shut off power to the winch before commencing any service or
maintenance task!
• The winch on top of the electric motor unit should be serviced as per the instructions
in the relevant Winch Product Manual.
• The electric motor is a sealed unit and does not require regular servicing of internal parts.
• To avoid potential sea water ingress and to maximise the service life of your electric winch motor
unit, it is recommended to re-lubricate the motor unit drive shaft Sealing Ring [7] once a year.
Under intensive use, such as racing, charter or blue water sailing, we recommend lubrication
twice a year.
To access the Sealing Ring [7], it is necessary to remove the winch from the winch base.
Refer to the Winch Product manual for instructions.
The Sealing Ring should be lubricated with a grease such as Klüber ISOFLEX TOPAS NB 52,
or Andersen Winch Grease.
Drive shaft
Sealing Ring
E1 Single Speed Electric Motor Unit, 12V & 24V
To Suit Self-Tailing Winch Sizes 46,50
p13