Electrolux AOFP061U 운영 및 유지보수 지침 매뉴얼 - 페이지 18

{카테고리_이름} Electrolux AOFP061U에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux AOFP061U 27 페이지. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Electrolux AOFP061U에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지)

페이지 인쇄

C.2.7 INSERTING THE FOOD (CORE) PROBE IN THE PRODUCT

Make sure the probe is clean and sterilized whenever inserting

it in food, and always take care when handling the probe,

because it has a sharp point.

Using the food (core) probe in the chilling cycles guarantees

good results. To be certain of this, it is important to position the

probe correctly, i.e. right at the center of the largest piece of food,

making sure it doesn't come out the other side and being very

careful not to touch the tray.

C.3 STARTING THE OPERATING CYCLES

To get familiar with the chiller's electronic board as quickly as

possible, we have provided a series of step-by-step instructions

on how to enable the various functions.

When switched on, the appliance sets up for the SOFT chilling

cycle by default.

You can now select the cycle by pressing the

according to the following instructions:

- Hard chilling:

PRESS THE BUTTON UNTIL THE

LIGHT TURNS ORANGE

PRESS THE CYCLE BUTTON

IF THE PROBE HASN'T BEEN INSERTED IN THE PRODUCT,

THE CYCLE WILL BE TIMED.

- Hard chilling with chilling end time change:

PRESS THE BUTTON UNTIL THE

LIGHT TURNS ORANGE

IF YOU WANT TO CHANGE THE CHILLING END TIME

PRESS THE BUTTON FOR 2 SECONDS

PRESS THE BUTTON TO SELECT THE VALUE.

IF A SELECTION IS NOT MADE AFTER 5 SECONDS THE

LAST VALUE DISPLAYED WILL BE CONFIRMED

AUTOMATICALLY YOR YOU CAN CONFIRM BY

PRESSING THE BUTTON AGAIN.

PRESS THE CYCLE BUTTON

- Hard chilling with program select:

PRESS THE BUTTON UNTIL THE

LIGHT TURNS ORANGE

button,

PRESS THE "SELECT PROGRAM" BUTTON

INDICATOR LIGHT LIGHTS UP

PRESS THE BUTTON UNTIL THE

THE INDICATOR LIGHT TURNS ORANGE

IF THE PROGRAM SELECTED IS OK

PRESS THE CYCLE BUTTON