Andersen E Series 교체 - 페이지 4
{카테고리_이름} Andersen E Series에 대한 교체을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen E Series 5 페이지.
Andersen E Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 애플리케이션 매뉴얼 (2 페이지)
페이지 인쇄13
Split in cord pass through grommet must be
positioned to face toward sash. Failure to
Interior
do so will result in damage to cords.
Blind Panel
Frame
Blind
Panel Frame
Grommet
Insert blind cords and re-insert blind panel grommet into hole in blind
panel frame. Position the split in blind panel frame grommet so that
it will face toward sash when installed. Failure to do so will result in
damage to the blind cords.
15
Interior
Reconnect tilt control knob cable to D-rod. Tighten hex screw using
.050" hex key.
17
Interior
Unlock and open window. Position insect screen near window opening.
9069265
Tilt Control Knob
Cable
.050" Hex Key
D-rod
Window
Frame
Insect
Screen
4
14
Interior
Push the blind assembly toward top of blind panel and snap into
mounting clips.
16
Interior
Lift blind panel into window opening. Set bottom of panel onto window
sash and tip into place. Fasten using saved screws.
▶ Proceed to step 17 for windows WITH insect screens.
▶ Proceed to step 21 for windows WITHOUT insect screens.
18
Interior
Feed plastic tassels of blind cords one at a time through grommet in
insect screen frame.
Phillips Screwdriver
Blind Panel
Window Frame
Plastic Tassels
Grommet