Electrolux ARCTIS 70258 GS 사용자 설명서 - 페이지 10

{카테고리_이름} Electrolux ARCTIS 70258 GS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ARCTIS 70258 GS 20 페이지. Electrolux freezer

Attention: After having reversed the opening direction of the doors check that all

the screws are properly tightened and that the magnetic seal adheres to the

cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may

not fit perfectly to the cabinet. in that case, wait for the natural fitting of

the gasket or accelerate this process by heating up the part involved with a

normal hairdrier.

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if

supply voltage and current values correspond with those of the mains at the

installation location.

e.g.: AC

(i.e. 230 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The

supply must have a fuse rating of at least 10 Amps. If the socket is not

accessible once the appliance is built in, the electrical installation must include

suitable means of isolating the appliance from the mains (e.g. fuse, cut-out,

current trip or similar with a minimum contact separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled

electrician. Please contact your dealer or our customer service department

for repairs.

Prior to Initial Start–Up

• Please clean the appliance interior and all accessories prior to initial start-

up (see section: "Cleaning and Care").

Freezer button ON/OFF

Temperature setting button (+)

Temperature display

Temperature setting button (-)

FROSTMATIC function "on" indicator (yellow)

FROSTMATIC button

Alarm light

ALARM OFF button

230 ... 240 V

230 ... 240 V~

50 Hz or

50 Hz