Communications Specialties Pure Digital Fiberlink 7231 사용자 설명서 - 페이지 6
{카테고리_이름} Communications Specialties Pure Digital Fiberlink 7231에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Communications Specialties Pure Digital Fiberlink 7231 12 페이지. Rgbhv video with stereo audio receiver card for pioneer pdps
페이지 인쇄1. Before installing the 7231 card, use a wiping cloth with rubbing
alcohol to remove any possible dust on the PCI connector. Using a
dry towel may cause a malfunction due to static electricity.
2. During installation, it is likely that you will place the PDP in the
prone position (PDP glass on bottom side). To protect the glass from
any damage, lay a mat or cloth in the area where you plan to work.
Make sure it is free of any debris that might cause scratches. Also, be
sure that the working area can support the weight of the entire front
case of the PDP.
3. Do not modify a 7231 receiver card. It may cause a malfunction or
breakdown.
4. Do not modify or damage the inner side structure of the PDP.
5. When installing a 7231 receiver card, be extremely cautious of static
electricity and the damage that it may incur. Do not touch any
components on the receiver card!
6. This product is not manufactured for repeated insertion and extrac-
tion. Please be especially careful when inserting or extracting the
product from the PDP.
Inserting the Card:
1. Remove and save the screws at both ends of the slot cover, located on
the bottom of the Pioneer PDP. Remove the slot cover.
2. Align the board of the 7231 card with the rails on both sides of the
PDP slot.
3. Carefully and gently slide the 7231 card into the PDP, making sure
to keep the card straight. If the card is inserted at an angle or with too
much force, you may damage the card or the PDP.
4. After the card is fully and firmly inserted, use the screws that were
removed in step 1 to secure the 7231 card.
6