Andersen Verilock 0115209 사용자 설명서 - 페이지 11

{카테고리_이름} Andersen Verilock 0115209에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen Verilock 0115209 16 페이지. For a-series and 400 series windows and patio doors, 200 series patio doors and renewal by andersen windows

페이지 인쇄

Battery Replacement Instructions - continued

A-Series, 400 Series & 200 Series

Hinged Patio Doors

1. Unlock and open the door panel. Secure the door

panel in the open position.

2. Loosen set screw on exterior handle using 1/8"

hex key. Remove handles and set aside.

3. Remove interior escutcheon plate from the active

door panel.

4. Remove VeriLock sensor assembly.

5. Remove discharged batteries from the VeriLock

sensor assembly using a small flat blade

screwdriver to carefully pry the batteries from the

terminals. (see battery disposal information on

page 5).

6. Replace the batteries with (2) two fresh CR-2032

lithium coin batteries, with the positive (+) side

facing out as shown.

7. Position assembly on door panel.

8. Reinstall interior escutcheon plate and handles on

door panel.

9. Verify that the sensor is communicating with your

security system or self-monitoring application

by closing the patio door and checking for the

closed message and then locking the patio door

and checking for the locked message.

9142268

A-Series, 400 Series & 200 Series

Hinged Patio Doors

Exterior

Handle

Set Screw

1/8"

Hex Key

Bushing

Active Panel

Interior

Escutcheon

User's Guide

Interior

Handle

Bushing

Spindle

Escutcheon

Bolt

VeriLock

Sensor

Assembly

Small

Flat Blade

Screwdriver

CR-2032

Batteries

Insert screwdriver

into slot end to

remove batteries.