Andersen A Series 조정
{카테고리_이름} Andersen A Series에 대한 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen A Series 4 페이지. Hinge replacement & hinge and hardware adjustment
페이지 인쇄Hinge Replacement &
Hinge and Hardware Adjustment
Product Series: A-Series, 400 Series
Product Type: Hinged Inswing Patio Doors
(Manufactured After November 2005)
Parts Included:
Horizontal
Adjustment
Screw
Hinge (1)
Vertical
Adjustment
Screw
#10 x 1" Screw (2)
#10 x 1-3/4" Screw (4)
#10 x 3" Screw (2)
▶ Hinge Replacement page 2.
▶ Hinge and Hardware Adjustment page 3.
· Use caution when working at elevated heights and around window and door openings. Follow the manufacturers'
instructions for ladders and scaffolding. Failure to do so could result in injury or death.
· Follow manufacturers' instructions for hand and power tools. Always wear safety glasses. Failure to do so could result in
injury, product or property damage.
· Windows and doors can be heavy. Use safe lifting techniques and a reasonable number of people with enough strength
to lift, carry, and install window and door products. Heavier windows and doors will require mechanical assistance. Failure
to do so could result in injury, product or property damage.
· Metal fasteners and components could corrode when exposed to preservative-treated or fire-retardant treated lumber.
Use approved fasteners and components to fasten window or door. Failure to do so could cause a failure resulting in
injury, product or property damage.
"Andersen" and all other marks where denoted are trademarks of Andersen Corporation. ©2008-2023 Andersen Corporation. All rights reserved.
Read these instructions before starting procedure. For
additional information visit www.andersenwindows.com.
For questions call 1-888-888-7020.
Para obtener una versión en español de esta guía,
visite el sitio www.andersenwindows.com
Tools and Supplies Needed:
Safety
Glasses
Pencil
WARNING
Phillips
Flat Blade
Screwdriver
Screwdriver
5/32" Hex Key
(included with Patio Door)
0 005 413 B C- 0 0 04/13/23