Atid AT870 매뉴얼 - 페이지 11
{카테고리_이름} Atid AT870에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atid AT870 16 페이지. Rf-id bluetooth
Atid AT870에 대해서도 마찬가지입니다: 빠른 매뉴얼 (12 페이지), 사용자 설명서 (11 페이지)
페이지 인쇄
● Bluetooth Manager Reference Guide
1.3 Connecting to Bluetooth Printer(SPP)
BT-Manager is coded only for Hardware support to connect AT870 to a Bluetooth printer to start BT_Manager.
Figure8. Step-7 "Mode Save" Click
Confirm the connection to selected
device
※ Mode Save
Supporting two kinds of mode save way.
Scan-0, Scan-1 indicates the status of whether could searching by PDA
Or Bluetooth peripherals
• Connecting mode - Scan-0 and Scan-1 can connect to the Bluetooth
device near around . when executing BT_Manager , Scan-0 as Default
mode, have to scan and connect to the device manually. On the
contrary , Scan-1 could automatically connect to the most recently
accessed device .
• Preparing mode - Wait-0, Wait-1 can not make PDA search for the
device, but preparing to be connected from the Bluetooth device near
around. Wait-0 just can connect to the most recently accessed device
while Wait-1 is available for connection to those all trying to connect
devices .
1. Searching SSP Device and select as the description above.
2. Inputting the Pin Code provided from printer manufacturer.
3. Press the Connect button for connecting.
4. Selecting Scan1 in the Operating Mode would make it have most
recently connected printer's information, so when re-running BT-
Manager and click open button, will keep connecting status with printer.