CARNEO Guard Kid + 4G Platinum 사용 설명서 지침 - 페이지 2

{카테고리_이름} CARNEO Guard Kid + 4G Platinum에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CARNEO Guard Kid + 4G Platinum 7 페이지. Children's watch with gps locator

must log in without having to enter a PIN code. Finally, test the availability of mobile internet on
your phone without using WIFI. Launch an Internet browser on your phone and try, for example,
www.carneo.sk.
Note: The expected data transfer in standard use is up to 200MB per month without the use of a
video call, which has a data consumption of 5MB / 1 minute of video call. Therefore, it is up to each
user to purchase a card with a sufficient amount of data according to their needs.
3. Install the CARNEO GUARD application on your mobile phone, by scanning the QR code
located on the bottom of the box, but by searching for the CARNEO GUARD application in google
play or the Appstore.
4. Slide off the plastic cover on the side where is the SIM card picture displayed. Sufficient force
must be used to open it, so we recommend using fingers with a firm nail to prevent the nail from
breaking.
The watch must be switched off when inserting the SIM card! If you have inserted the
SIM card into the slot while the watch is switched on, it is then necessary to restart the watch so that
the SIM card loads correctly. Insert the SIM card in the correct direction as shown on the picture:
If you have the SIM card properly inserted in the slot, insert it back, with the contacts facing up,
towards the display. Push the cover hard enough so that the rubber sealing sticks to the hole
sufficiently. You can now turn on the watch with the on button.
After installing the application and launching it, select the language at the bottom, left on the
screen. Select the option to register. Enter your e-mail address in the "Enter your e-mail" field. In
the "Enter verification code" field, enter the code located on the right side of the gray rectangle. In
the "8-16 Letters and numeric new password" field, create password containing from 8 up to 16
letters. Use a password that contains both, letters and numbers. Confirm that you have read the
user agreement and choose to register.
5. Add watch. Click on the dashed square on the right of the first box. The camera launches on the
phone and scans the QR code, which is located on the label attached to the watch, but also in the
watch menu. In the nickname field, enter e.g. your baby's name. In the next field, select your
affiliation / relationship with the child. Confirm OK. The application confirms that the watch is
registered with the message "saved".

IMPORTANT NOTICE!

5 minutes before registering the watch, place the switched on watch with the inserted SIM card in
the space outside or on the window sill to connect to the GPS satellites. The initial connection,
synchronization of the clock and applications with the server can take several minutes, but a
maximum of 30 minutes approximately. Therefore, if the application will display a message during
set up, that the watch is not connected to the network or is offline, please wait for some time, but
for maximum of 30 minutes. Also the activation or display of various functions such as
eavesdropping and others will be displayed in the application after some time, max. within 48
hours. This is due to a review of the legislation of the country in which the watch is located.