Community C6 설치 및 운영 매뉴얼 - 페이지 14

{카테고리_이름} Community C6에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Community C6 20 페이지. 4.5", 6.5", 8" full-range c series coaxial ceiling loudspeakers
Community C6에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (16 페이지)

페이지 인쇄

designed to drop into the Tile Bridge support

rails channels, they will not work properly if

mis-aligned. See note and Figures 12 and 13

on the next page.

Note: If you're using loose wires, rather than

conduit, irst connect the wires to the termi-

nal block atop the loudspeaker assembly, and

secure them with the top cover/strain relief,

before installing the can through the cutout

and into place.

Figure 12. Position of Loudspeaker Relative

to Bridge Support Rails During Installation

Figure 13. Drop-Stop Tabs (highlighted)

Snap Out Over Bridge Support Rails

(Temporarily holds unit in place even before

you secure it with the mounting clamps)

Community Commercial Design Series

4. Locate the two Phillips-head actuators

around the perimeter of the loudspeaker's

front lange (see Figure 14). Using a #2 Phil-

lips screwdriver twist each actuator clock-

wise until you feel resistance as the clamps

press against the ceiling bridge rails (Fig. 15).

Figure 14. Turning the two loudspeaker

clamp actuators clockwise securely locks

Figure 15. Mounting Clamps Shown Grip-

ping Tile Support Bridge Rails After the

Clamp Actuators Have Been Tightened.

Installation and Operation Manual

the unit into the ceiling.

Page 14