Community CLOUD 4 설치 매뉴얼 - 페이지 14

{카테고리_이름} Community CLOUD 4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Community CLOUD 4 17 페이지. Community cloud series high output ceiling speakers

PAINTING THE SPEAKER

The CLOUD speaker's textured white finish does not need further finishing. Where the interior design

requires it, these speakers are easy to paint. The speaker backcan and front face are all metal, the

white powdered coat paint can easily be painted over with almost any type of latex or oil based paint.

The rim can be painted before installation or after it has been mounted to the ceiling.

Painting Process

Make sure the speaker is clean and free from any dirt or grease. Do not use abrasives such as

sandpaper or steel wool, or harsh solvents such as gasoline, kerosene, acetone, MEK, paint thinner,

harsh detergents or other chemicals. Use of these cleaners may result in permanent damage to the

enclosure.

Apply two or more thin coats of either latex or oil-based paint. Latex paint will adhere better if an oil-

based primer is used first. Application can be made by rolling, brushing or spraying.

Painting the Grille – Painting the grille requires removal of the CLOUD logo and the internal grille

cloth, then spray painting. If the grille is rolled or brush painted, the mesh may become clogged with

paint and poor sound quality may result. After the paint has dried, replace the internal grille cloth and

CLOUD logo.

Painting the Speaker Along with the Ceiling – If you wish to paint the speaker along with the

ceiling after installation, insert a plastic or cardboard paint shield into the front of the speaker to mask

the drivers and internal baffle. Paint the speaker and then remove the shield once the paint is dry.

CLOUD 4 and CLOUD 6 – Installation Guide