Bosch 9000240475 작동 및 설치 지침 - 페이지 9
{카테고리_이름} Bosch 9000240475에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 9000240475 28 페이지.
페이지 인쇄
7. Tightenall3 screws(3 Nm)so
thatthe powerconductors are
heldsecurely in place.
8. Checkthe U.L strainrelief
clampto makesurethat it is
tight andcannotbe turned.
9. Replace the coveronthe
terminal b lockandfastenin
place.
[-_
Make sure that the U.L strain
relief clamp is outside the
cover!
The appliance
is now ready to be
plugged into the 4-wire receptacle
of the power rating.
Connecting
3-wire
power
supply
cord
1. Remove the screws from the
cover of the terminal block
located at the top rear of the
appliance.
2. Make sure that there is
a grounding
cable.
3. Loosen the 2 screws labeled L
and the screw labeled N in the
terminal
block.
4. Attach the 2 power cord outer
conductors
(red and black) to
the 2 terminals
labeled L and
the remaining
power cord
conductor
(white) to the
terminal
labeled N.
5. Tighten all 3 screws (3 Nm) so
that the power conductors
are
held in place securely.
6. Check the U.L strain relief
clamp to make sure that it is
tight and cannot be turned.
7. Replace the cover on the
terminal
block and fasten in
place.
[-_
Make sure that the U.L strain
relief clamp is outside the
cover!
Additional
grounding
procedure
Some local regulations
may
require a separate ground.
In such cases, the required
accessory
ground wire, clamp
and screw must be purchased
separately.
Never ground the dryer to
plastic plumbing
lines, gas lines
or water pipes.
Grounding
instruction
This appliance
must be grounded.
In the event of a malfunction
or
breakdown,
grounding
will reduce
the risk of electric shock by
providing
a path of least resistance
for the electric current.
For Canada the dryer comes with a
cord which has an equipment
grounding
conductor
and a
grounding
plug. The plug must be
plugged
into an appropriate
outlet
which has been properly installed
and grounded
in accordance
with
all local regulations
and ordinances.
Improper
connection
of the
equipment
grounding
conductor
may result in electric shock.
Have the appliance
checked
by
a qualified electrician
or service
technician
if you are in doubt as
to whether the dryer has been
properly grounded.
9