Andersen Windows & Doors FSB 1076 사용 설명서 - 페이지 4

{카테고리_이름} Andersen Windows & Doors FSB 1076에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen Windows & Doors FSB 1076 7 페이지. Trim set hardware application fsb 1035 hardware style shown in guide. procedure is similar for all styles. for active and passive hardware

페이지 인쇄

CAUTION

Escutcheon base plate screws

must be installed from interior and

sleeve nuts from exterior to prevent

tampering with the handle set from

the exterior.

NOTICE

For optional exterior keyed lock

hardware, make sure exterior keyed

lock gasket is positioned securely to

the exterior escutcheon base plate

before applying to panel, as shown.

Fill bottom screw hole with sealant as shown. Position escutcheon base plates over spindle on both sides. Fasten using escutcheon base plate

screws and sleeve nuts as shown. (DO NOT fully tighten screws until escutcheon base plates are straight up and down.)

9 173 98 0

Exterior

Keyed Lock

Gasket

(for optional

exterior keyed

lock)

Escutcheon Base

Plate Sleeve Nuts

(exterior side)

(side view)

DO NOT overfill hole

with sealant or allow

sealant to seep out

the other side.

Escutcheon Base

Plate Screws

(interior side)