ATIK Cameras One 어셈블리

{카테고리_이름} ATIK Cameras One에 대한 어셈블리을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIK Cameras One 4 페이지. W/ guider kit
ATIK Cameras One에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

Atik One with guider kit - Assembly

Thank you for purchasing the Atik One guider kit. It was designed to ease the task of autoguiding, while eliminating differential flexure,

something that is a nightmare for any astrophotographer.

Components of the kit

The Kit is shipped in 2 boxes, and includes all you need to start imaging right away:

Attaching the guider module to the Atik One

Attaching the guider module to the Atik One is a very simple task. Just follow these instructions:

1- Take the 2" adapter off the main body.

3- Verify that the 3 screws are secure (careful not to

over-tighten). The module should now be securely at-

tached to the Atik One camera.

1 - Atik One camera; 2 - Atik GP (attached to OAG); 3 -

OAG body with 2" adapter; 4 - mounting screws

2- Align the module with the 3 holes and attach it to the

Atik One camera, using the 3 supplied screws.

4- Screw back in the 2" adapter onto the module.

Page 1