Bosch Nexxt Premium WTMC6300 작동, 관리 및 설치 지침 매뉴얼 - 페이지 22
{카테고리_이름} Bosch Nexxt Premium WTMC6300에 대한 작동, 관리 및 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Nexxt Premium WTMC6300 28 페이지.
페이지 인쇄
Operation
Using the dryer
1. Open the door.
Meno
Select
Additional Options
%
[
If you have chosen a time
program
don't forget to select
a time. Otherwise
the
"Start/Stop"
indicator
light wilt
not flash and the dryer will not
start.
If the door has not been closed
properly, the dryer wilt not start.
2. Check tint filter.
The filter should be cleaned
after and before every drying
process.
Cleaning the filter
reduces the drying time and
saves energy.
i
3. Rotate program
selector to the
desired program.
Select the program which
corresponds
to the laundry in
the dryer from the program
selection
table (see page 21).
The dryer light turns on inside
the drum.
]]]The
estimated
remaining time
will be indicated.
[_3
Lint filter indicator flashes for
5 seconds
"Check tint fitter"!
4. Select "Additional
Options"
on
the display.
More detailed
information
on
the individual
additional
options
can be found on page 19.
5. If required,
select "Option" by
pressing the button.
The "Options"
are explained on
page 20.
E_The
estimated
remaining
time
wilt be updated.
6. Place laundry in the empty
drum. Put each piece of laundry
into the machine
separately.
For best results the laundry to
be dried must be sorted
according
to type of laundry
and desired degree of drying.
For further information
see
page 18.
[_
Observe drying symbols of the
laundry manufacturer.
If drying woolen clothing and
shoes, see the information
on
page 17 and page 23.
Ensure that there is only laundry in
the drum. Check that all items are
completely
in the drum.
7. Close the door.
The "Start/Stop"
indicator
light
starts flashing.
8. Press the "Start/Stop"
button.
The "Start/Stop"
indicator
light
illuminates.
[_The
program
starts with an
acoustic
signal (if set).
If an automatic
program
has been
selected, the indicator
lights
indicate the progress
of the
program
sequence.
[_At
the end of the program
sequence
damp
dry an
acoustic
signal is emitted
(if set).
J
:
[
[
At program
end an acoustic
signal is emitted (if set) and the
LED "wrinkle block/finished"
illuminates,
When the drying process is
complete
(program or selected
time program ended), the drum
rotates at specific intervals.
This prevent the laundry from
creasing
(see "Extended
Wrinkle Block", page 20).
22