Bosch Nexxt Series 작동, 관리 및 설치 지침 매뉴얼 - 페이지 18
{카테고리_이름} Bosch Nexxt Series에 대한 작동, 관리 및 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Nexxt Series 27 페이지.
Bosch Nexxt Series에 대해서도 마찬가지입니다: 작동, 관리 및 설치 지침 매뉴얼 (26 페이지)
페이지 인쇄
Spin
Spin cycle for spinning wet, hand
washed laundry.
Water is drained before and during
the spin cycle.
Soak
A cycle for pre treatment of heavily
stained items. The soak cycle lasts
2 hours and ends with a short spin
cycle.
Drain
Can be used to drain water without
a spin cycle.
Temperature Settings
The following wash temperatures
are available:
Temp. boost: 150 F (66 C)
(only Regular/Cotton)
hot:
125 F (52 C)
warm:
95 F (35 C)
cold:
60 F (15 C)
Maximum spin speeds of the
programs
The indicator light max spin speed" is lit
red.
Revolutions
Program
per minute
1000
Regular/Cotton
800
Permanent Press
600
Delicates
800
Wool
600
Active Wear
1000
Quick Mix
1000
Spin
Reduced spin
The indicator light reduced spin" is lit red.
Only if you have selected a reduced
spin speed for gentle treatment of
your laundry.
Gentle spin speeds
The indicator light Gentle spin speed" is lit
red.
Revolutions
Program
per minute
400
Hand Wash
400
Soak
18
No final spin
The indicator light no final spin" is
lit red.
For delicate laundry, the water
remains in the machine after the last
rinse.
Use this setting to avoid creasing if
the clothing cannot be taken out of
the washing machine immediately
upon completion of the cycle.
d
CAUTION
Before unloading you must drain
the remaining water by selecting
Drain or Spin and starting the
machine.
Modifiers
Spin Selection
Preset cycle setting of max. spin
speed can be changed.
Press this button until the the
desired setting lits up.
Delay Start
Before starting a program you can
modify by when the cycle should be
started.
Press Delay Start button. The
display shows the start time
The time can be delayed up to a
maximum of 19 hours (with 1 hour
increments) by pressing the Delay
Start button again.
The Start time begins running
immediately after pushing the
Start/Pause button. This is
indicated by the points between the
digits flashing.
Changes to the Start time are
i
possible at any time, press the
d
Delay Start button until the
new time appears.
If the program is changed or if
i
the program is interrupted, the
preselected Start time is also
interrupted. The Ready in time
of the program is displayed.
The Start time must be
reselected.
Option buttons
Bleach
When this button is pressed,
a bleach cycle will be added to
the selected cycle.
The washing cycle time is extended
accordingly.
Rinse Plus
When this button is pressed, an
0:00.
additional rinsing cycle will be
added to the selected cycle.
Washing cycle time is extended
accordingly.