ATIK Cameras Titan 사용자 설명서 - 페이지 7

{카테고리_이름} ATIK Cameras Titan에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIK Cameras Titan 10 페이지.
ATIK Cameras Titan에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지)

Autoguider port pinout

5. Planetary (high-speed) Imaging

The Atik Titan can take up to 15 frames per second and store them in uncom- pressed 16-

bit format on a standard hard disk drive. In order to do high-speed imaging using Capture,

the following steps must be taken:-

check the Pre checkbox in the Exposure dialog – this enables the fast download

mode;

set a suitable exposure time in the Exposure dialog – note that high frame rates

require short exposure times;

check the Autosave Images checkbox in the Exposure dialog;

enter a suitable folder and file name prefix in the text box below the

Autosave Images checkbox (or use the browse button alongside it);

select a suitable suffix scheme from the Seq fmt. drop-down list;

enter your desired starting sequence number in the Seq No. text box;

start imaging by selecting the Camera | Loop menu option or else by clicking

on the Loop toolbar item;

stop imaging by deselecting the Camera | Loop menu option or else by

clicking on the Loop toolbar item again.

Please ensure that your hard disk drive has enough space available for your

proposed observing run – in high-speed imaging mode the Titan eats up disk space

very quickly! Performance will be improved by minimizing the number of other

processes running on the system. If the frame rate is reduced by hard disk

performance limitations, you might be able to improve it by using a RAM disk, such as

the one provided by Dataram (see http://memory.dataram.com/products-and-

services/software/ramdisk/download-ramdisk).

Page 7