Anderson RB580 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Anderson RB580에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anderson RB580 6 페이지.

QUICK START GUIDE

RB580

The RB580 is equipped with a loading arm that make it possible to load bale directly

onto the bale wrapper without using a frontal loader. The loading arm is sent with

extension cables to control the wrapper from the tractor seat. For loading a bale, the

turntable must be parallel to the loading arm. The loading arm is equipped with a

safety device (1) to prevent collisions with the turntable and error operations. The

loading arm must be dropped halfway between the turntable and the ground so that

the table can rotate. Another safety device (2) is installed to insure that the tilting table

is down to be able to lift the arm.

The fork of the arm adjusts to different bale diameter. An adjustable backstop (3)

allows you to charge bales of 4 or 5 feet wide and filed on the center of the turntable.

When in transport mode you have a safety pin (4) to lock the arm up.

4- Transport mode

Safety pin

1- Tilting table safety

2- Loading arm safety

3- Bale adjustment