Bosch WQG233DMFG 사용자 설명서 및 설치 지침 - 페이지 42
{카테고리_이름} Bosch WQG233DMFG에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch WQG233DMFG 48 페이지. Clothes dryer
페이지 인쇄
NL
Transport, storage and disposal
1 7 Transport, on-
hit and drain
huh
Here you will get an explanation about the way
on which you prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
17.1 Preparing the device for
transport
PAY ATTENTION!
If the device is used immediately after
transport, the refrigerant in the
device may cause damage to the
device.
Let the device rest for two hours
▶
immediately after transport before
using it for the first time.
Tip: The device may contain residual
water and drip during transport.
Transport the device upright.
Requirements
s The condensed water container is
emptied. Empty the condensation
container → Page 32
s The device is turned on.
→ "enable device",
Page 28
Set any program → Page 28 .
1.
Start the program
2.
→ Page 28 and wait 5 minutes
at.
a The condensation water has been pumped out.
Turn off the device.
3.
→ "turn off device",
Page 29
Emptying the condensed water container
4.
→ Page 32 .
Push in the condensed water
5.
container → Page 33 .
42
Disconnect the plug of the device
6.
from the mains.
a The device is ready for trans-
port wine.
17.2 Disposal of your old
appliance
Environmentally friendly disposal
allows valuable raw materials to be
reused.
WARNING
Risk of health hazard!
Children can lock themselves in the
appliance and endanger their lives.
Do not install the appliance behind
▶
a door that blocks or prevents the
opening of the appliance door.
In the case of discarded appliances,
▶
remove the plug of the mains cable
from the socket, then cut the mains
cable and damage the lock of the
appliance door so that the appliance
door no longer closes.
WARNING
Risk of fire!
The refrigerant R290 in this device is
environmentally friendly but
flammable and can catch fire if not
properly disposed of.
Dispose of the device properly.
▶
Make sure that the pipes of the
▶
cooling circuit are not damaged.
Unplug the power cord from the
1.
outlet.
Cut the power cord.
2.
Dispose of the device in an environmentally friendly way.
3.