Community V2-3564 설치 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} Community V2-3564에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Community V2-3564 9 페이지. V series
페이지 인쇄ACCESSORIES
VLF-Y208 MOUNTING YOKE BRACKET
The VLF-Y208 yoke bracket is designed to mount to the VLF208 subwoofer
in either a vertical or horizontal orientation. It is engineered to provide a high
margin of safety when supporting the VLF208 subwoofer. Yokes are steel,
finished with a durable double-layer powder coat in either black or white. Refer
to the VLF-Y208 Quick Start instructions accompanying the yoke.
VLF-SAB STEERED ARRAY BRACKET
The VLF Steered Array Bracket enables the construction of cardioid bass
arrays, steered bass arrays, or vertical bass columns of compact VLF Series
subwoofers, or combinations thereof. Designated the VLF-SAB, it is intended
for use only with the VLF208 and/or VLF208LV subwoofer systems.
For more information, consult the VLF-SAB user's guide for detailed safety
instructions. It is the responsibility of the installer to insure that safe installation
practices are followed. Installation of loudspeakers should only be performed
by trained and qualified personnel. It is strongly recommended that a licensed
and certified professional structural engineer approve the mounting design.
IMPORTANT: All rigging fittings should remain sealed, otherwise air
leaks will occur in the enclosure that can compromise the low-frequency
performance with distortion and reduced output.
WARNING: VLF rigging fittings are rated at a Working Load Limit of 100
lbs (45.4kg) with a 10:1 safety margin. No single rigging fitting should
ever be subjected to a load that is greater than 100 lbs. Failure to heed
this warning could result in injury or death!
V SERIES models
Figure 4. VLF-Y208 mounted to VLF subwoofer
VLF Owner's Guide
Page 7