Carnival King 382HSPW35DBL 사용자 설명서 - 페이지 4

{카테고리_이름} Carnival King 382HSPW35DBL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carnival King 382HSPW35DBL 6 페이지. 3.5 qt condiment warmers

3.5 QT. Condiment Warmers

User Manual

Installation and Operation Instructions

Notice: Wash all parts properly before every use.

Caution: DO NOT OPERATE UNIT WITHOUT WATER. Check water level frequently when in operation.

Apply more water as needed.

Caution: Pump spout becomes hot during operation. To avoid possible serious injury, use protective

heat-resistant gloves when handling hot unit.

Warning: DO NOT OPERATE ON HIGH HEAT FOR MORE THAN 45 MINUTES. Contents may overheat

and burn.

Fill wells.

If using #10 can or inset, locate and place included spacer at the bottom of the unit. This is used to

support a #10 can or inset and create a water gap for more uniform heating.

Fill each well with 5 cups of hot water. Filtered water is recommended.

Do not overfill.

ii.

Check water levels throughout the holding period.

iii.

Sauce bottle warmer: Leave at least ½" gap between the top of the water line and the warmer rim.

Too much water will cause water to overflow when bottles are used.

Place #10 can or inset (or bottles) into the well. NEVER PLACE FOOD DIRECTLY INTO WELL.

Bottle Warmer: There is no need to use the spacer, just place the bottle holder inside the well.

Notice: For bottle warmer, only use bottles that have a minimum heat resistance of 200 degrees

Fahrenheit or higher. Check with the manufacturer of your bottles to ensure they can be used in

a bottle warmer.

Now install lid accessories or pump(s).

Plug cord into power source and press switch(es) to the 'On' position.

Set the thermostatic knob to the food manufacturer's recommended serving temperature(s), or

desired temperature.

To heat the unit faster, you may temporarily set the temperature to maximum. Once food has reached

desired temperature, adjust temperature back down to holding.

5 Cups

5 Cups

CarnivalKingSupplies.com

5 Cups