ANDERSON-NEGELE NSL-F-00 운영 매뉴얼 - 페이지 12

{카테고리_이름} ANDERSON-NEGELE NSL-F-00에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ANDERSON-NEGELE NSL-F-00 20 페이지. Continuous level sensor. sensors for food and biopharma.
ANDERSON-NEGELE NSL-F-00에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지)

페이지 인쇄

1. Repair and Maintenance

NSL-F Series Operating Manual

Installation of the „Large User Interface" (LUI)

Remove the plastic cover (continue with step 4), or remove the puck with the mounted small dis-

play (continue with step 2)

Remove the small display

Install the puck in the sensor head

Mount the large display

Hot-plug function: The large display can be installed while the sensor is energized, but this requires the

usual precautionary measures when working with electronic components.

If the display is being installed while energized, it is necessary to press both buttons simultaneously

for > 10 s after the display is installed to activate the display.

7.1 Retrofitting the display if a display was not yet installed

After removing the plastic cover, the large display can be inserted in the head of the sensor. The tabs

(Fig. 2) must be inserted in the appropriate openings on the puck (Fig. 1). Then the display can be easily

pressed onto the puck. No wiring is required.

Note: After the Large User Interface is mounted, the sensor can only be operated on this display since

the display conceals the connector for the MPI-200 adapter. If operating the sensor using the program-

ming software is preferred, the display must be removed. Then the connector of the programming

adapter can be plugged in

fig. 1

Remove the plastic cover: To do so, bend the tabs

slightly inwards with a screwdriver to be able to

remove the cover easily.

fig. 2