Dreamline AQUA SWING 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Dreamline AQUA SWING에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreamline AQUA SWING 9 페이지. Shower door

Mark the drill holes on the wall through the

predrilled holes in the Wall profile (01).

Now drill holes in the wall using a Φ5/16 drill

bit and insert the Wall anchors (03).

Apply silicone along the back of the Wall profile

and into the drill holes. Fasten the Wall profile

to the wall with the Big head Screw ST4.2x40 (04).

See Fig 3.

Slide the assembled Glass door with

Hinged glass profile (02) into the groove of the

Wall profile (01) and level it vertically (Fig 4.3).

Make final adjustment (up to 1/2") if required

keeping the door glass level. Drill the holes

through the first layer of the Wall profile (01)

and into the Hinged glass profile using an Φ1/8

drill bit.

Secure the Wall profile and the Hinged

Glass profile with the Round head screws

ST4.2x16 (05) and washers. Cover the screw

heads with the Decorative Covers (06).

See Fig 4.

"AQUA SWING" VER 1 REV 2 11/2015

Φ8mm

Φ5/16"

Check the

installed door

glass for level

Fig 4

Fig 3

Φ3mm

Φ1/8"

inside