Dreamline ENIGMA SHDR-60727912 Series 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Dreamline ENIGMA SHDR-60727912 Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreamline ENIGMA SHDR-60727912 Series 17 페이지. Shower door

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram in this manual as a reference. Before discarding the carton, check for small hardware bags

that may have fallen to the bottom of the box. If any parts are damaged or missing, please contact

DreamLine

for replacement.

Shower Door Installation

1. Measure the distance between the two finished

walls at the top, middle and bottom. This distance

is marked as "W".

Also, check the walls for plumb and the threshold

for level.

See Fig. 1 for details.

2. Your Upper Guide rail (#03) has been

precut for your Shower model width of: 60"

or 72" (the actual rail is shorter than the

model width by design).

To fit your finished opening, you will need to

cut the Upper Guide rail (#03) from the

door end which is farther from the Glass

bracket (#07) holes. The length to cut off

will be L.

Model Width – opening W = cut off length L

FOR EXAMPLE

If your model width is 48" and your finished

opening is 46", then you will need to cut 2" off

of the rail:

example:

48" – 46" = 2" cut off

"Enigma" Ver.4 Rev.5 02/2016

See Fig. 2 for details

Fig. 1

Fig. 2