Carolina Swing Boom Cutter 소유자/운영자 매뉴얼 - 페이지 9
{카테고리_이름} Carolina Swing Boom Cutter에 대한 소유자/운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carolina Swing Boom Cutter 20 페이지.
페이지 인쇄
keep aware of. While watching the
cutter, also pay attention to what
obstacles or terrain are in front of the
cutter boom and prime mover.
Maintain a safe speed while cutting.
tree branches with the cutter in an
elevated position could result in Death
or Serious Injury if the skid steer
becomes unstable. Never raise the
cutter more a few feet off the ground
when working on slopes or uneven
terrain.
Adjusting Cutter Height
& Level
Use the skid steer loader lift to adjust
the elevation of the cutter. The fore &
aft leveling can be accomplished by
using a combination of the tool
cylinder mounted on the boom and the
skid steer's attachment tilt cylinders.
When the cutter is at the 0° position
(straight in front of skid steer) the tool
cylinder on the boom can be moved to
level the deck.
When the cutter is at the 90° position,
it can be leveled by using the tool
cylinder connected to the attachment,
as well as slight variations in the skid
steer tilt cylinders.
Bank Cutting
Swinging Cutter
Serious Injury or Death from pinching,
Carolina Attachments LLC.
Cutting brush and
To prevent
keep all persons and objects away
from this attachment while it is
operating.
Your swing boom cutter has the
capability of rotating 90° to the right of
the skid steers mounting point, or
stopping anywhere between 0° and
90°.
Before swinging the boom to the right
or back to center make sure there are
no objects in the way that could hinder
the movement of the boom swing.
View through cab door with cutter in
straight-ahead position
To rotate the cutter boom, push the
joystick right or left for the boom
swing function. To tilt the cutter,
move the joystick forward or back to
adjust the deck.
Joystick Controller Supplied with
Example of skid steer manufactur e r supplied
auxiliary electric controller
Page 9
Attachment
Swing Boom Cutter
March 2016