ANDI ACHF643 사용 설명서 - 페이지 3

{카테고리_이름} ANDI ACHF643에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ANDI ACHF643 10 페이지. Andi ceramic cooktop instruction manual

Safety

Residual heat indicators

After using the hob, residual heat remains in the heating area.

The power display shows the code "H", warning the heating area

is still hot.

Auto shut down protection

During the hob use, it is shut off automatically when the default

timing reach by the program if without operating. If several heating

zones work simultaneously, the hob will be automatically shut off when

the heating area reaches it's default timer. The default working

timer for various power levels are shown in the table below:

Power level

Default working

time(hour)

Installation

Selection of installation equipment

Drill holes on the table surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 50 mm space shall

be preserved around the hole.

Be sure the thickness of the table surface is at least 30mm. Please select

heat-resistant table material to avoid larger deformation caused by the heat

radiation from the hotplate.

As shown in Figure (1)