ATIM ACW/SF8-MR1 사용자 설명서 - 페이지 11

{카테고리_이름} ATIM ACW/SF8-MR1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIM ACW/SF8-MR1 17 페이지. Metering / state of dry contacts

Installation

NOTE

The antenna is integrated in the housing which must be installed vertically with the cable gland facing downwards.

It is advisable to open the box to access the terminal block. To do this, insert the

screwdriver into the slot and tilt it downwards to lift the internal tab (see photo

opposite).

Then pull on the back side to separate the two parts of the case.

For best results, it is recommended to install the box without environmental

obstruction and to place it at a minimum height of 1m50.

It must be mounted on a vertical support or fixed to a wall (especially not on a

metal post!).

The box is fixed on a flat wall or a tube according to the type of installation

desired.

The cable should not exceed 10m in length and should be shielded.

ATIM_ACW-MR1_UG_EN_V1.6

1,50m