DREAMS Deacon Ottoman 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} DREAMS Deacon Ottoman에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAMS Deacon Ottoman 8 페이지.

ASSEMBLY

1) While one person holds the slatted

frame up, the second person must fit

the gas strut to the hinge.

2) One end of the strut will already b e

attached to the hinge. At the other

end, take the nut off the bolt and

attach the other end of the strut.

3) Once this is in place, replace and

tighten the nut.

4)Repeat process for the other side

of the bed.

1) Identify the head end of your

slatted frame, this will be the end with

holes.

2) Carefully lower the slatted frame

into the base so that it rests on the

hinges and the support brackets.

Again, this will require two people to

do safely.

3) Align the holes on the frame with

the holes on the hinge and pass the

three bolts (D) through the washers

provided and then into the holes each

side of the frame.

4) Place a nut onto each of the M6

bolts and tighten with fingers, then,

using the Allen key provided, fully

tighten.

5) Attach the Fabric Pull Handle

at the end of slat frame.

6) The slatted frame and base are

now joined.

NOTE: When fully assembled and the

mattress is in position, please

raise and lower the ottoman 5

times. To ensure the gas

pistons are fully lubricated.

Revision number 1/1

STEP 6