ATIM ACW-SF8 설치 매뉴얼 - 페이지 8

{카테고리_이름} ATIM ACW-SF8에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIM ACW-SF8 10 페이지. Atim cloud wireless - metering 2 digital inputs – 1 wirecut input

b. Mode of operation:

Parameter code (1 byte)

0x0A

Reminder: By default, the product uses the configuration indicated by the DIP switches if no

configuration has been specified via downlink frames. If a configuration has been applied via

downlink, it will be used the next time the device restarts.

c. Setting meter 1:

The index of meter 1 can be set to any value you choose in the range from 0 to 4294967295.

Command to send

C1050Axxxxxxxx

Example: To set the index of meter 1 to 1000, you must send the command C1050A000003E8 via

downlink (because 1000 = 3E8 in hexadecimal).

ACW-MR2_QIG_FR_V2.5

Parameter value (2 bytes)

The possible values are:

0x00 = meter mode with transmission every 10 minutes

0x01 = meter mode with transmission every 6 hours

0x02 = meter mode with transmission every hour

0x03 = meter mode with transmission every 3 hours

0x04 = meter mode with transmission every 30 minutes

0x05 = meter mode with transmission every 12 hours

0x06 = meter mode with transmission every 24 hours

0x07 = meter mode with transmission every 48 hours

0x08 = digital mode with polling of wirecut input

0x09 = digital mode with radio transmission on falling edge

0x0A = digital mode with radio transmission on rising edge

0x0B = digital mode with radio transmission on falling and

rising edges

0x0C = ELEC mode with readings every 10 minutes +

transmission once per hour

0x0D = ELEC mode with readings every 30 minutes +

transmission every 3 hours

0x0E = ELEC mode with readings once per hour +

transmission every 6 hours

0x0F = N/A

0x10 = use the DIP switch configuration

Parameter value (4 bytes)

Possible values for xxxxxxxx (in hexadecimal):

0x00000000

0xFFFFFFFF

- Complete technical manual available at www.atim.com -