ANDI WMA 7612 L 분해 - 페이지 11

{카테고리_이름} ANDI WMA 7612 L에 대한 분해을 온라인으로 검색하거나 PDF를 다운로드하세요. ANDI WMA 7612 L 14 페이지.

• Disconnect the cables from the programmer.

30- THERMOSTAT

o Remove top plate and control panel. Pull out the thermostat knob.

o Remove the rear panel and the thermostat bulp./cable socket from the switch

o Remove the two screws that attach thermostat/switch to the control panel

support. Take out the capillary of the thermostat from the harness.

30a- Temparature / Spin speed selection ROTARY SWITCH

o Remove top plate and control panel. Pull out the knob.

o Remove the cable socket from the switch

o Remove the two screws that attach switch to the control panel support.

31- PUSH BUTTONS

• Remove top lid, drawer and front panel.

• Remove the push button cover.

• Release the plastic snaps on the push button from the panel.

• Disconnect the cables.

• Remove top lid.

• Water level switch is turned 90º and removed from its bracket.

• Disconnect hoses and cable connections on the water level switch.

• Remove top lid.

• Disconnect valve cables.

• Valve hose clamp is moved back on the hose.

• Remove the hose from the valve.

• Press the lock pin which secures the valve to the body, twist anti-clock

wise, and remove the valve.

Figure 12