Comnet CNFE4+1SMSS2 설치 및 운영 매뉴얼

{카테고리_이름} Comnet CNFE4+1SMSS2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CNFE4+1SMSS2 4 페이지. Four port 10/100t(x) + one port 100fx ethernet self-managed switch

페이지 인쇄
Comnet CNFE4+1SMSS2 설치 및 운영 매뉴얼
INSTALLATION AND OPERATION MANUAL
CNFE4+1SMS(M,S)2
FOUR PORT 10/100T(X) + ONE PORT 100FX
EThERNET SElF-MANAGEd SwITCh
The ComNet
CNFE4+1SMS(M,S)2 is a five-port self-managed Ethernet switch with
™
uplink management functionality. It provides four ports operating at 10/100Mbps
and is designed to combine Ethernet data from the four electrical ports into a single
optical port and forward that data to the next network device, using two-fiber ST or
SC optical connectors. There is no programming required to use this switch. The
ComNet CNFE4+1SMS comes pre-programmed, preventing network video flooding
with dIP switch selection of the fiber port as uplink or as an unmanaged switch It is
"Plug-and-Play" easy to use.
lEd indicators confirm the operating status of this device. See Figure 4 on Page 3
for an explanation of the indicators.
The ComNet CNFE4+1SMS may be either wall mounted, rack mounted ("ComFit"
packaging) or dIN-rail mounted with the use of the ComNet dINBKT1 adapter. See
Figure A on Page 4 for mounting instructions.
See Figures 1 – 5 for complete installation details.
INS_CNFE4+1SMS(M,S)2_REVA 07/08/11 PAGE 1