Comnet netwave NW3 빠른 시작 사용 설명서 - 페이지 5
{카테고리_이름} Comnet netwave NW3에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet netwave NW3 8 페이지.
페이지 인쇄
Quick start user Guide
tYpIcaL poINt-to-poINt coNFIGURatIoN
Note: NWK3 and NWK4 point to point kits have been set up at the factory and locked to each other. No need to set Wireless
mode and may not need to set the Ip address. these are designed to connect to each other once powered and properly
aligned.
PC
tYpIcaL poINt-to-MULtIpoINt coNFIGURatIoN
Note: NW3 and NW4 multipoint nodes will need to have the Wireless mode set to either ap or Client (default is Client). and
the Ip addresses will need to be all set to different addresses (default address is 192.168.10.101). once this is done, all
the clients will connect to the multipoint ap with all other setting kept at default.
PC
tech suPPort: 1.888.678.9427
Cat5 Cable
Passive
Power
DVR
CNGe2Fe8MS
injector
Managed
Switch
Cat5 Cable
Passive
Power
DVR
CNGe2Fe8MS
injector
Managed
Switch
NwK3
(Access Point)
Nw3
(Access Point)
NW3/NW4
Passive
Power
iP
NwK3
(Client)
injector
Camera
Passive
Power
iP
Nw3
(Client)
injector
Camera
Passive
Power
iP
Nw3
(Client)
injector
Camera
Passive
Power
iP
Nw3
(Client)
injector
Camera
INS_NW3_NW4_QS_REV– 04/23/13 PAGE 5