Caroma G Series 설치 및 유지 관리 매뉴얼 - 페이지 6

{카테고리_이름} Caroma G Series에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caroma G Series 16 페이지. Electronic soap dispenser
Caroma G Series에 대해서도 마찬가지입니다: 설치 및 유지보수 지침 매뉴얼 (16 페이지), 설치 및 유지보수 지침 매뉴얼 (16 페이지), 설치 및 유지 관리 매뉴얼 (17 페이지)

INSTALLATION

INSTALLING THE SOAP DISPENSER

Cut an adequate opening in the wall for

the dimensions of the soap dispenser

base (where you want to install the

spout) and the corrugated tube.

Disconnect the soap dispenser body with

the rosette from the base by unscrewing

the set screw.

Mount the soap dispenser base into the

opening in the wall and secure it using

the two anchors provided in the package.

Important: The soap dispenser base

should be installed so that the outside

surface of the finished wall falls between

the minimum and maximum lines marked

at the base.

Assemble the temporary protective soap

dispenser base cover.

Assemble the corrugated tube to the

soap dispenser base and make sure it

stays outside the wall when you do the

tiling.

SET SCREW

MIN MAX