Comnet CNFE4SMSPOE 설치 및 운영 매뉴얼

{카테고리_이름} Comnet CNFE4SMSPOE에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CNFE4SMSPOE 4 페이지. Four port 10/100t(x) ethernet self-managed switch with power over ethernet (poe+)

페이지 인쇄

INSTALLATION AND OPERATION MANUAL

CNFE4SMSPOE

FOuR PORt 10/100t(X) EthERNEt SElF-MANAGEd SwItCh

wIth POwER OVER EthERNEt (POE+)

the ComNet

CNFE4SMSPOE is a four-port self-managed Ethernet switch with

™

uplink management functionality. It provides four ports operating at 10/100Mbps

and is designed to combine Ethernet data from the three electrical ports into a

fourth electrical port and forward that data to the next network device. there is no

programming required to use this product. the ComNet CNFE4SMSPOE comes pre-

programmed, preventing network video flooding with dIP switch selection of port

four as uplink or as an unmanaged switch. All four ports can supply up to thirty (30)

watts of power ("Power over Ethernet") based on the IEEE 802.3at standard. It is

"Plug-and-Play" easy to use.

lEd indicators confirm the operating status of this device. See Figure 4 on Page 3

for an explanation of the indicators.

the ComNet CNFE4SMSPOE may be either wall mounted, rack mounted ("ComFit"

packaging) or dIN-rail mounted with the use of the ComNet dINBKt1 adapter. See

Figure A on Page 2 for mounting instructions.

See Figures 1 – 5 for complete installation details.

INS_CNFE4SMSPOE_REVA 07/08/11 PAGE 1