Bosch 1033VSR - 1/2" 0-850 RPM Heavy Duty Drill 섹션 매뉴얼 - 페이지 11
{카테고리_이름} Bosch 1033VSR - 1/2" 0-850 RPM Heavy Duty Drill에 대한 섹션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 1033VSR - 1/2" 0-850 RPM Heavy Duty Drill 32 페이지. Drills & fastening tools & accessories
Bosch 1033VSR - 1/2" 0-850 RPM Heavy Duty Drill에 대해서도 마찬가지입니다: 부품 목록 (3 페이지), 작동/안전 지침 매뉴얼 (33 페이지)
BOSCH Professional Drilling
TITANIUM
Titanium coating
Applications: Designed for
repetitive heavy-duty drilling in
common stainless steels, carbon
and alloy steels, aluminum, soft
case iron, wood, wood composites
and plastic. Available in jobber
length with 3/8" reduced shank.
• Dramatically reduces heat
and friction between bit and
workpiece, making bits last up to
6X longer than standard HSS bits.
• Allows faster drilling speeds.
• Surface hardness in excess of
80 HRC to penetrate tough
materials, including common
stainless steels.
Speed Helix
• Faster penetration, easier drilling,
reduced heat.
• Extended drill bit life, extended
cordless battery life.
135° split point
• Starts drilling on contact.
• No walking or skating.
• No center punch required.
Legend
✔
Recommended
✔
OK to use
✔
Not recommended
Titanium
Black oxide
Cobalt
BLACK OXIDE
Black oxide heat treatment
Applications: Designed for general
purpose heavy-duty drilling in carbon
and alloy steels, aluminum, soft cast
iron, wood, wood composites and
plastic. Available in jobber length,
stubby length, extended length
(aircraft), 3/8" reduced shank,
1/2" reduced shank
(Silver & Deming).
• Reduces friction between bit
and workpiece.
• Extends drill bit life.
Speed Helix
• Faster penetration, easier drilling,
reduced heat.
• Extended drill bit life, extended
cordless battery life.
135° split point
• Starts drilling on contact.
• No walking or skating.
• No center punch required.
Material Chart
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔ ✔
Toll Free: 877-BOSCH-99
Dr i l l i ng
Meta l
COBALT
Cobalt
Applications: Designed for
heavy-duty drilling in hardened
stainless steels, cast iron and
titanium. Available in jobber length.
• Cobalt formulation provides
overall bit hardness of 66-68 HRC
for penetration of very tough,
abrasive materials.
• Able to withstand very high
temperature drilling applications
for extended periods of time.
• Under high drilling temperatures,
bits stay sharper longer than
standard HSS.
• Thicker web increases rigidity
in hard materials.
135° split point
• Starts drilling on contact.
• No walking or skating.
• No center punch required.
✔ ✔ ✔
✔
✔ ✔
Boschtools.com
195