Comnet CNFE2MC 기계 설치 지침 - 페이지 2
{카테고리_이름} Comnet CNFE2MC에 대한 기계 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CNFE2MC 3 페이지. 10/100 mbps ethernet 2 port media converter 1 channel: electrical 1 sfp optical 2 channels: electrical 1 sfp optical
Comnet CNFE2MC에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (7 페이지)
페이지 인쇄
INSTALLATION INSTRUCTIONS
LINK A: YELLOW: Link = Highest Data Rate (100 Mb/s)
GREEN: Solid = No Activity
Blinking = Activity
GREEN
YELLOW
RJ45
GREEN = Powered On
RJ45: YELLOW: Link = Highest Data Rate (100 Mb/s)
GREEN: Solid = No Activity
Blinking = Activity
Off = No Link
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other
means of security. Access should be limited to service personnel who have been instructed about the reasons for the restrictions
to the location. Any and all precautions should be taken and controlled by the authority responsible for the location.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an environment compatible with
the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
SINGLE 10/100 MEDIA CONVERTER
BLACK WITH WHITE STRIPE
CNFE2MC
BLACK
INS_CNFE2MC_REVA
04/07/09
Page 2