Dreamwave Rock Star 사용자 설명서 - 페이지 7

{카테고리_이름} Dreamwave Rock Star에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreamwave Rock Star 18 페이지.

2.4G Wireless Multi-Pairing

* More than one piece RockStar can be set as SLAVE speaker, within the 10M distance wireless range from the MASTER speaker.

MASTER

SLAVE

Step 1. Choose one RockStar as Master speaker, turn it on and switch to MASTER, press button "2.4G/PAIR" for 3 seconds,

LED "2.4G" (Refer to Page 7) quick ﬂash indicating searching for Slave speakers.

Step 2. Connect SLAVE 1 : Turn on the second RockStar and switch to SLAVE mode, press button "2.4G/PAIR" for 3 seconds,

pairing complete automatically after 3~5 second reaction.

Step 3. Connect SLAVE 2: Press MASTER speaker's "2.4G/PAIR" button for 3 seconds, then turn on the third RockStar and switch to SLAVE mode,

press button "2.4G/PAIR" for 3 seconds as well. Pairing complete automatically after 3~5 second reaction.

Step 4. If more SLAVE speakers to be connected, repeat Step 3 operation.

*Wireless range: 10M between MASTER and SLAVE speakers.

*Under 2.4G pairing, SLAVE speakers are non-functional except the "2.4G/PAIR" button.

*To disconnect either SLAVE speaker from MASTER, press "2.4G/PAIR" on SLAVE speaker for 3 seconds.

*To disconnect all SLAVE speakers from 2.4G pairing, press "2.4G/PAIR" on MASTER speaker for 3 seconds.

*Do not slide over the "OFF" position when switching from MASTER to SLAVE, shall pause at "OFF" for two seconds.

SLAVE 1

MASTER

SLAVE

SLAVE 2

MASTER

SLAVE