Comnet CWFE2SCS2 설치 및 운영 매뉴얼 - 페이지 11
{카테고리_이름} Comnet CWFE2SCS2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CWFE2SCS2 12 페이지. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Comnet CWFE2SCS2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 설치 및 운영 매뉴얼 (10 페이지)
페이지 인쇄
Technical Specifications
ComNet CWFE2SC(M)(S)2 technical specifications are as follows:
Standard
Connector
Switch architecture
Fiber parameters
Transparent packet
Link Lost Forward
DIP Switch
LED
Power
Dimension
EMI & safety
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure
Fiber: Duplex SC
RJ45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair cable
Auto MDI/MDI-X and Auto-Negotiation Function Support
Store and Forward
Fiber Core: Multi-Mode (62.5/125um, 50/125um)
Single-Mode (9/125µm)
Wavelength: 1310nm Multimode & Single-mode
Fiber Distance: Multi-Mode Fiber 2KM
Single-Mode Fiber 30 KM
64 to 1518 Bytes for Non-VLAN Ethernet packet
UTP Fiber: If UTP port link is down, the converter will force
the fiber to link down.
Fiber UTP: If Fiber port link is down, the media converter
will force UTP port to link down.
DIP Switch 1: UTP Auto-Negotiate / 100Mbps Full Duplex
mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF (Link Lose Forwarding) Disable/Enable
DIP Switch 4: Switch Converter / Pure converter mode
Module: Power, TX (100Mbps, LK/Act, FDX/COL) Fiber
(LK/Act, FDX/COL)
Stand-alone (external adapter): DC12V / 1A
Module: 119mm x 85mm x 26mm
FCC Class A, CE, UL, CUL
9