Comnet FVR40D2I1C4E 설치 및 운영 매뉴얼

{카테고리_이름} Comnet FVR40D2I1C4E에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet FVR40D2I1C4E 10 페이지. 4-channel 10-bit digitally encoded video

INSTALLATION AND OPERATION MANUAL

FVT/FVR40D2I1C4E

4-CHANNEL 10-BIT DIGITALLY ENCODED VIDEO

+ 2 BI-DIRECTIONAL DATA + AIPHONE

INTERCOM

™

+ 4 CONTACT CLOSURE

+ 100MB ETHERNET

+ REDUNDANT POINT-TO-POINT DUAL SFP OPTICAL PORTS

The FVT/FVR40D2I1C4E series utilize 10-bit digital video encoding and decoding

for high-quality video transmission that meets the requirements of EIA RS-250C

for short-haul video transmission. These environmentally hardened units provide

transmission of four independent video channels and two bi-directional data

channels. They also provide transmission of one Aiphone

intercom channel and

™

four contact closure channels with tamper supervision in addition to one 10/100Mb

Ethernet channel.

The ComNet

FVT/FVR40D2I1C4E has dual optical (SFP) ports to provide a redundant

™

point-to-point fail safe topology in the event of loss of one fiber or one optical module.

Operational status can be monitored by using the web management interface

through the addition of the ComNet network managed chassis and network

management interface module.

Bi-color (red/green) LED indicators are provided for confirming operating status in

addition to alarm contacts for fault monitoring. See Figure 15 on Page 9 for LED

explanations.

Packaged in the exclusive ComNet ComFit housing, these units may be either wall

or rack-mounted (using ComNet C2 network-managed rack), or may be DIN-rail

mounted by the addition of ComNet model DINBKT1 adaptor plate. See Figure A on

Page 10 for mounting instructions.

INS_FVT/FVR40D2I1C4E_REVA 06/22/12 PAGE 1