DREAVER MZD-03 사용자 설명서 - 페이지 8
{카테고리_이름} DREAVER MZD-03에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAVER MZD-03 16 페이지. Foot spa massager
페이지 인쇄RANGE OF REMOTE CONTROL
Within 1 meter
When using, the infrared transmitter on the remote control shall
aim at the ambient light, within a distance of one meter and at an
angle of 90° to the red light. There can be no obstruction in
between.
WHEN FINISHING FOOT MASSAGE
Power off the footbath into standby mode, unplug the power supply, and pour out the water;
Pull the support rod back by hand to move the support rod, rotate it and install it on the panel,
and then press to fold the front and back ends of the footbath, and place the folded footbath.
Clean
a.
Please make sure the plug is unplugged before cleaning.
b.
Pour out the water from the tub.
c.
Wipe the surface of the foot spa with a soft cloth.
d.
Do not wipe the remote control and the power cord socket with a water-soaked towel.
e.
Do not clean the foot spa with corrosive liquids.
Store
a.
Cut off the power supply, unplug the power cord from the machine, and pour out the
water.
b.
Pour out the water and place it in a safe, ventilated, dry, and cool place to drain.
c.
Fold the footbath, place the remote control, and fold the power cord. Put it in the
packaging box, and then place it in a safe, ventilated, dry and cool place.
Important
»
The warranty is void in the event of damage resulting from failure to
follow the instructions in this guide regarding the assembly,
adjustment and maintenance of the equipment. Changes not approved by
JJ-Commerce will void the JJ-Commerce product liability completely. If you have
any
questions,
D R EAVER - FOOT SPA MA SSAG ER
please
contact
our
customer
service
department
6