Comnet FVR80D4SFP 설치 및 운영 매뉴얼

{카테고리_이름} Comnet FVR80D4SFP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet FVR80D4SFP 6 페이지. 8-channel digitally encoded video + 4 channels of bi-directional data using small form-factor pluggable (sfp) optical devices

페이지 인쇄

INSTALLATION AND OPERATION MANUAL

FVT/FVR80D4SFP

8-CHANNEL DIGITALLY ENCODED VIDEO

+ 4 CHANNELS OF BI-DIRECTIONAL DATA USING

SMALL FORM-FACTOR PLUGGABLE (SFP) OPTICAL DEVICES

The FVT/FVR80D4SFP series optical video link provides transmission of eight

10-bit medium-haul quality digitally encoded video channels and four bi-directional

data channels through a selectable small form factor pluggable module (SFP).

See instructions included with SFP for installation of selected module.

Figure 5 on Page 3 illustrates the data electrical connections from the RJ45 Data

connectors and also the connection cable and "breakout box" connections.

Figure 7 on Page 4 illustrates the specific data connections for RS232, 2-Wire

RS485 and RS422/4-Wire RS485. (This last data connection also applies to

Manchester & Bi-Phase data transmission.)

Each data channel is configured for the electrical interface by means of the

"DATA SELECT" switch on the front panel. Figure 6 on Page 4 illustrates the

switch settings to set the type of data for each channel.

Figure 8 on Page 5 illustrates the electrical connections between the

"Customer Equipment" and the FVT80D4SFP and FVR80D4SFP.

Bi-color (Red/Green) LED indicators are provided for confirming operating

status. See Figure 4 on Page 3 for LED indication explanations.

These units are interchangeable between stand-alone or card mount

configurations. See Figure A on Page 6 for mounting instructions.

INS_FVT/FVR80D4SFP_REV–

05/07/10

PAGE 1