Caroni SSG5580A/C 운영 매뉴얼 - 페이지 6
{카테고리_이름} Caroni SSG5580A/C에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caroni SSG5580A/C 8 페이지. Petrol sweeper
페이지 인쇄4. Operation
Warning: before using this unit, read through the safety instructions in the
first part!
4.1 How to start the engine
1.
Turn the switch to "ON".
2.
Open the choke and accelerator.
4.2 Turn off the engine
Turn the switch of engine to "OFF" and the engine will turn off.
4.3 Operation of clutches (left & right handlebar)
1.
Operation of clutch on left handlebar: the clutch on the left handlebar controls the
brush operation through the clutch on the handlebar.
A. In
the loosing position,
B. Press the clutch downward and the sweeper will starts to work.
2.
Operation of clutch on right handlebar:
CONTROL. (The user will be able to choose the speed gear according to the need and move the
equipment forward
Left Handle Bar
4.4 Selection of speed transmission
This unit has a five-gear transmission that can be chosen by adjusting the speed
transmission rider.
moving forward equipment.
A .Push the speed transmission rider forward and disengage it from the speed limit frame;
B. Slide right or left to the required position through the rider. Then release the rider and
set the transmission slot.
4.5 Operation of support wheel
The support wheel plays a role of supporting and turning the unit, and also for adjusting
the height of the brush.
A. Increase the height of the brush by rotating the rider of the support wheel clockwise.
B. Decrease the height of the brush by rotating the rider of the support wheel
counterclockwise.
4.6 Adjust the direction of the brush
Pull the direction adjustment rider of the brush and adjust the direction of the brush
roller.
A. Turn the roller right by pulling the rider backward
the sweeper
at a various speeds
Usually use 1 ~ 3 gear for
won't start sweeping
the right handlebar with the function of: DRIVE
)
Right Handle Bar
sweeping.
Use 4~5 gear for not sweeping but
6