Comnet CLFE8UTP 설치 및 운영 매뉴얼 - 페이지 2

{카테고리_이름} Comnet CLFE8UTP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CLFE8UTP 9 페이지. Ethernet-over-utp/twisted pair extender with pass-through poe

페이지 인쇄

INSTALLATION AND OPERATION MANUAL

FIGURE 1 – CLFE1UTP

CAT5/6

UTP

FIGURE 2 – CLFE1UTP

LEFT PANEL

For 1-pair mode, use the first pair of pins (pins 1 & 2) of the

"Extended Ethernet" RJ-45 port on the left panel.

Note: 4-pair mode is required for PoE.

FIGURE 3 – CLFE4UTP

LEFT PANEL

TECh SUPPORT: 1.888.678.9427

2 1

CAT5/6 or UTP

CAT5/6

RIGHT PANEL

Ground

Screw*

* WARNING: A ground connection is

required for the surge protection to work.

Failure to ground properly voids the

warranty and may cause damage.

RIGHT PANEL

* WARNING: A ground connection is

required for the surge protection to work.

Failure to ground properly voids the

warranty and may cause damage.

CLFE(X)UTP

CAT5/6

–

PoWER SUPPLy

CoNNECTIoN

via external power adaptor

Optional, if there

is no power supply

connected to the unit

it will try to detect PoE.

Note: Center

pin on power

connector is

positive (+).

Ground

Screw*

INS_CLFEXUTP_REV–

09/28/11

PAGE 2