ATK 250LQ 1995 소유자 매뉴얼 - 페이지 13

{카테고리_이름} ATK 250LQ 1995에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATK 250LQ 1995 18 페이지.

and during severe use in tight woods,

is reduced.

Brake ﬂuid:

Your new ATK's brake system is ﬁlled

with premium Bel-Ray DOT 5 ﬂuid.

DO NOT mix with another brand or

rating of brake ﬂuid. If another brand

or rating is preferred, completely drain

and ﬂush the brake system ﬁrst.

Brake pads:

Replace the brake pads when the fric

tion pad material is worn to 1/8 inch in

thickness. The front and rear brake

calipers use the same brake pads.

CARBURETION

Type

Mikuni TMS

Size

38mm

Main jet

310-330

Needle

6DGY4-59 or

6DGY4-58

Needle clip position

Slide

Bleed screw adjustment

1.5 turns

Adjusting the carburetion:

Your new ATK's carburetion is set at

our Utah factory which has an eleva

tion of around 4,000 feet. To obtain

optimum performance in your riding

area, we suggest that an hour or so be

set aside to ﬁne-tune the carburetor

for your elevation and weather condi

tions.

/ /

ATK 1995 Owner's Manual